About
About SPIDER-SL-40-06T1O69999SY9HHHH
The SPIDER-SL-40-06T1O69999SY9HHHH switch is a fanless and unmanaged Ethernet rail switch that has been designed by Hirschmann Automation. This specific unmanaged switch comes with a terminal block that is intended to provide the voltage the switch needs so it can operate and perform its functions properly. This switch can operate in a voltage range of 12 to 24 Volts DC and it has a current consumption of 365 milliamps maximum at 24 Volts DC. This switch has a power consumption rating of 8.7 Watts maximum. The Hirschmann Automation SPIDER-SL-40-06T1O69999SY9HHHH unmanaged Ethernet rail switch comes with a signaling contact with a 3-pin connector. This switch operates with multiple network mechanisms such as a twisted pair cable mechanism, a multimode fiber mechanism, and a single-mode fiber mechanism. These 3 mechanisms can operate with different maximum network lengths. The fact that the switch can operate with different mechanisms make it versatile enough to meet a wide variety of different application requirements.
The Hirschmann Automation SPIDER-SL-40-06T1O69999SY9HHHH fanless unmanaged Ethernet rail switch can communicate through Ethernet to maximum distances of 100 meters with the twisted pair cable mechanism, 550 meters with the multimode fiber mechanism, and 20 kilometers with the single-mode fiber mechanism. This means that the switch can cover both short and long distances. The Hirschmann Automation SPIDER-SL-40-06T1O69999SY9HHHH unmanaged Ethernet rail switch can be mounted on a DIN Rail with its plug-and-play mechanism that makes it easy to install without using tools. The switch has an IP 30 rated protective housing that enables it to operate in a temperature range of 0 to 60 degrees Celsius and a non-condensing relative humidity range of 0 to 95 percent. This switch comes with LED indicators that show the current power status, link status, data status, and the data rate status.
