About
About RSP25-11003Z6ZT-SK9V9HPE2S
The RSP25-11003Z6ZT-SK9V9HPE2S switch is an 11-port managed Ethernet switch that has been manufactured by Hirschmann. It is equipped with four 10/100 Base TX Ethernet ports. It is a durable and compact type of managed industrial DIN Rail switch. It offers both Fast and Gigabit speed. It comes with an enhanced redundancy option. This switch has an AC operating voltage range between 110 and 230 Volts AC. The front side of the RSP25-11003Z6ZT-SK9V9HPE2S managed switch has an RJ 11 socket for the V.24 interface. A single SD card slot to connect the auto configuration adapter is also present on the switch. The operating temperature should be set between 0 and 60 degrees Celsius. The enclosure of the switch has an IP 20 environmental protection rating. Because of this low protection rating, this switch can be used for indoor applications only. It has dimensions of 90 millimeters in width, 164 millimeters in height, and 120 millimeters in depth. It weighs a total of 1200 grams.
The Hirschmann RSP25-11003Z6ZT-SK9V9HPE2S managed Ethernet switch supports different protocols, including the parallel redundancy protocol, the high availability seamless redundancy protocol, the Device Level Ring (DLR) protocol, and the Fusenet protocol. The front side of the switch is equipped with two 2-pin or 3-pin plug-in terminal blocks. The switch uses a twisted pair cable with a length between 0 and 100. The RSP25-11003Z6ZT-SK9V9HPE2S managed switch consumes a total of 22 Watts of power during operation and it has a power output rating of 75 BTU per hour with normal operation. This switch supports independent VLAN learning, fast aging, unicast/multicast address entries, and the interface trust mode features. Both manual cable crossing and port power down features are supported by the switch. The RSP25-11003Z6ZT-SK9V9HPE2S managed switch can withstand moderate levels of operational vibration and shocks.
