About
About RSP20-11003Z6TT-SK9V9HSE2S
The RSP20-11003Z6TT-SK9V9HSE2S managed switch is a RSP series Ethernet switch from Hirschmann. The RSP series features Fast Ethernet and Gigabit Ethernet communication options. The RSP series also supports redundancy protocols such as the HSR (high-availability seamless redundancy), DLR (device level ring), PRP (parallel redundancy protocol), and FuseNet protocols. The RSP20-11003Z6TT-SK9V9HSE2S managed switch is a DIN Rail-mounted managed switch with 11 ports that support Fast Ethernet. Eight of the network ports are 10/100BASE-TX ports and 3 are slots for fiber SPFs. Other interfaces on the RSP20-11003Z6TT-SK9V9HSE2S managed switch include a V.24 management port and an SD card slot to connect the auto configuration adapter ACA31. Either AC or DC input can be used for switch operation, and the AC input range is 110 to 230 Volts AC while the DC input range is 60 to 250 Volts DC. The power supply should comply with the requirements for safety extra-low voltage or SELV according to the IEC/EN 60950-1 standards. It should be verified that the electrical installation meets all the local and national safety regulations.
A separate ground connection is provided on the Hirschmann RSP20-11003Z6TT-SK9V9HSE2S managed Ethernet switch for safety. The power consumption rating of the RSP20-11003Z6TT-SK9V9HSE2S managed switch is 15 Watts. The thermal power dissipated by this managed switch during operation is 51 BTU per hour. The RSP20-11003Z6TT-SK9V9HSE2S managed switch weighs approximately 1200 grams and it measures 90 x 164 x 120 millimeters. Hirschmann recommends that all the network devices be configured individually to prevent uncontrolled machine movement. Failure to follow this recommendation and the other safety instructions contained in the switch’s user manual can result in serious user injury or death or in equipment damage. The RSP20-11003Z6TT-SK9V9HSE2S managed switch is designed for vertical mounting. The switch should be installed in a cabinet with restricted access.
