About
About RSB20-0900ZZZ6SAABEH
The Hirschmann RSB20-0900ZZZ6SAABEH managed switch is a managed industrial Ethernet network switch. It is certified by the FCC, CE, and EN 61131 standards. The software on the switch supports many configurable features. Some of these features include fast aging, static unicast/multicast addressing, TFTP, LLDP, signal contact, device status indication, port mirroring, self-test on cold start, local user management, SNTP, and web-based management features. The RSB20-0900ZZZ6SAABEH managed switch measures 74 x 131 x 111 millimeters and it mounts on a 35-millimeter DIN Rail. The protection rating of the enclosure of the switch is IP 20. The approximate weight of the RSB20-0900ZZZ6SAABEH managed switch is 410 grams. The recommended ambient temperature ranges for the safe operation and storage of the RSB20-0900ZZZ6SAABEH managed switch are 0 to 60 degrees Celsius and -40 to 70 degrees Celsius, respectively. The non-condensing relative humidity level should be between 10 and 95% for both operation and storage.
There are 9 communication ports in total on the Hirschmann RSB20-0900ZZZ6SAABEH managed Ethernet switch. There are 3 slots for fiber SFP transceivers on this managed switch and there are 6 standard 10/100 BASE-TX ports with RJ-45 sockets. “SFP” is an acronym for “Small Form-factor Pluggable.” Both single-mode and multimode SFP transceivers can be used with this switch. This managed switch’s architecture gives greater flexibility to the users compared to managed switches with fixed multimode or single-mode ports. Furthermore, if an SFP transceiver malfunctions, the whole switch does not have to be removed and repaired. Instead, only the faulty SFP transceiver will need to be replaced. The input voltage range for the RSB20-0900ZZZ6SAABEH managed switch is from 18 to 32 Volts DC. The switch can be mounted on a 19-inch rack if the 19-inch installation frame, which is available as an accessory, is used to secure it in place.
