About
About RSB20-0800T1T1TAABHH
The RSB20-0800T1T1TAABHH switch is a managed Ethernet switch that is made for different industries. It has been manufactured by Hirschmann. The switch has a voltage rating of 24 Volts DC. It is equipped with 8 high-speed Ethernet ports. These Ethernet ports are 10/100 Base RJ 45 ports. They are located on the front side of the switch along with their LED indicators. The RSB20-0800T1T1TAABHH managed switch can be easily mounted with a DIN Rail. The switch meets the IEEE 802.3 standards and it offers the store and forward switching modes. The RSB20-0800T1T1TAABHH managed switch has a fanless design and comes in a small form factor. The switch also comes with a 6-pin plug-in terminal block for the signalling contact and power supply connections. An RJ 11 socket is also present along with the terminal for the V.24 interface. Both star and line topologies are supported by this managed switch.
The RSB20-0800T1T1TAABHH managed switch has a current consumption rating of 215 milliamps and a power output of 18 BTU per hour as heat. For operation, the ambient temperature should be set between -40 and 70 degrees Celsius and the switch can be stored between -40 and 85 degrees Celsius when not in use. The RSB20-0800T1T1TAABHH managed switch is a plug and play device and is easy to install and commission. The enclosure of the switch has an IP 20 protection rating that makes it possible to withstand several industrial environment conditions. The mean time between failure or MTBF rating is higher than 58 years in this switch variant. The RSB20-0800T1T1TAABHH managed switch can be configured by using management software. It supports HiVision file transfer. The switch can be accessed through the command line interface, For security, the switch uses the SNMPV3 protocol. The switch has dimensions of 71 millimeters in width, 131 millimeters in height, and 111 millimeters in depth.
