RSB20-0800S4S4TAABHH

About

About RSB20-0800S4S4TAABHH

The RSB20-0800S4S4TAABHH managed switch is a 8-port managed switch that has been manufactured by Hirschmann. This switch can be easily installed with a DIN Rail. It is equipped with six 10/100 Base RJ 45 ports and with two 100 Base ports. With an enclosure protection rating of IP 20, the switch cannot be used for outdoor applications or exposed to water. This managed switch runs with an operating voltage rating of 24 Volts DC. The RSB20-0800S4S4TAABHH managed switch comes with a single-mode FX cable. The switch has a fanless design and it is compact in size. It features a store and forward switching mode that helps with different applications. The 6 Ethernet ports of the switch are all located on the front of the unit and they all have their own LED indicators. A V.24 connector with an RJ 11 socket is located above the ethernet ports. A plug-in terminal block for the power supply and signalling connections is installed on top of the module.

The Hirschmann RSB20-0800S4S4TAABHH managed switch has a current consumption rating of 215 milliamps at 24 Volts DC. It has a total power output rating of 18 BTU per hour as heat with normal working conditions. The switch can be configured and programmed by using software with different features. It features port mirroring, topology discovery, command line interface support, and mail server options. The RSB20-0800S4S4TAABHH managed switch also comes with QOS, port prioritization, and multicast IGMP features. The ambient operating temperature should range between 0 and 60 degrees Celsius. During installation, the mains should be fully disconnected for safety. The RSB20-0800S4S4TAABHH managed switch should not be exposed to a source of high heat or extreme EMC noise.