RS20-0800T1T1SDAE

About

About RS20-0800T1T1SDAE

The Belden and Hirschmann RS20-0800T1T1SDAE switch is an 8-port managed switch. It comes with Layer 2 enhanced operating software and standard presettings. The RS20-0800T1T1SDAE managed switch supports the store and forward switching modes and it comes with a wide range of configurable features. Some of the features supported by the switch are the flow control, port prioritization, quality of service (QoS), HIPER-ring, RSTP, log file, RMON, address conflict detection, and duplex mismatch detection features. The switch can be configured from a serial interface, a web interface, and from the HiVision management software. The working temperature range of the switch is from 0 to 60 degrees Celsius. During storage and transportation, it needs to be kept in an area where it will be protected from corrosive vapors and where the ambient temperature is between -40 and 70 degrees Celsius. The MTBF of the switch is 63.4 years.

The Hirschmann RS20-0800T1T1SDAE managed switch supports a redundant 24 Volts rated power supply. The RS20-0800T1T1SDAE managed switch can also work with AC input. The current draw at 24 Volts DC is 221 milliamps and the current draw at 48 Volts DC is 111 milliamps. All ports on the RS20-0800T1T1SDAE managed switch are Fast Ethernet ports. Two ports are uplink ports and the remaining 6 are host ports. Twisted pair cables that are up to 100 meters in length can be used with the network ports on the switch. The RS20-0800T1T1SDAE managed switch is available in an IP 20 rated enclosure which measures approximately 74 x 131 x 111 millimeters. The RS20-0800T1T1SDAE managed switch weighs approximately 410 grams. The shock rating of the switch is 15 g for 11 milliseconds. The vibration rating is 1 millimeter at 2 to 13.2 Hertz.