RS20-0800S2S2SDAP

About

About RS20-0800S2S2SDAP

The RS20-0800S2S2SDAP switch is a managed network switch with 2 fiber uplink ports and 6 host ports. All the network ports on the switch are FastEthernet ports with a maximum data rate of 100 Mbps. The fiber uplink ports have SC sockets and the host ports have RJ-45 sockets. The fiber uplink ports can be used to connect the RS20-0800S2S2SDAP managed switch to aggregation switches that are located up to 32.5 kilometers away. The optical wavelength used for transmission and reception on the uplink ports is 1300 nanometers. Hirschmann recommends a 16 dB link budget for fiber links and a maximum allowed attenuation of 0.4 dB per kilometer. The host ports of the RS20-0800S2S2SDAP managed switch can be used to connect to Ethernet-enabled devices that are located up to 100 meters from the switch.

The Hirschmann RS20-0800S2S2SDAP managed switch can be operated from both AC and DC input sources. The rated power consumption of the switch is 7.7 Watts. Power over Ethernet is not supported on this switch. The approximate weight of the RS20-0800S2S2SDAP managed switch is 410 grams. The switch mounts on a DIN rail and it has dimensions of approximately 74 x 131 x 111 millimeters. The safety instructions provided with the switch must be read carefully by the technicians who are involved in its installation and operation. The RS20-0800S2S2SDAP managed switch complies with standards including the UL 508, CE, and FCC standards. It should be properly grounded before being put into operation. A separate ground screw is provided on the bottom left side of the front panel for this purpose. The switch does not have any field-serviceable components, and it should be returned to Hirschmann for repairs in the event of any malfunction.