OZD Profi 12M G11 PRO

About

About OZD Profi 12M G11 PRO

The OZD Profi 12M G11 PRO Optical Repeater Module is specifically designed for the PROFIBUS fieldbus networks by Hirschmann in the FiberINTERFACES product line. It provides 3 mutually independent ports. The optical input levels of the ports can be measured by using a conventional voltmeter. The OZD Profi 12M G11 PRO Optical Repeater Module also offers multicolored light-emitting diodes for indicating the operation of the module as a whole and for indicating errors and malfunctions. It uses 24 Volts DC voltage as the power supply voltage. The relative, non-condensing humidity range that the module can tolerate is 10% to 95%. The OZD Profi 12M G11 PRO Optical Repeater Module has an EN 50170 PROFIBUS standards-compliant electrical port for reliable data transmission. It also has BFOC connectors for connecting optical fibers.

The Hirschmann FiberINTERFACES series OZD Profi 12M G11 PRO Optical Repeater Module has a 5-pin terminal block for the signaling contacts and power supply connections. It uses cables that are up to 3000 meters long for multimode fiber networking. The module supports several redundancy functions to minimize power and data losses. The maximum operating voltage range of the OZD Profi 12M G11 PRO Optical Repeater Module is from 18 to 32 Volts DC. It is delivered with a set of start-up instructions. The protective housing of the drive contains a front panel made of metal and 2 plastic sections. It is a rail repeater module that is meant to be mounted on a 35-millimeter DIN Rail. It uses a relay with an unconnected contact as the signal contact for signaling disruptions. It also uses glass fiber optic transmission technology to perform large data transmissions efficiently.