About
About WS-C3560X-48T-E
Product Overview:
Energy efficiency, security and easy-availability: these 3 are the USPs of this Cisco WS-C3560X-48T-E standalone switch. In the IP base image, this enterprise-class line WS-C3560X-48T-E switch is featured with OSPF for routed access. Cisco WS-C3560X-48T-E standalone switch is a non-PoE model switch with 48 10/100/1000 PoE+ Ethernet ports. The Cisco WS-C3560X-48T-E hardware feature list includes Multicast routing, QoS service feature along with IPv4 and IPv6 routing.
Primary Features:
Energy Efficient Ethernet support gets aligned with 4 uplink network modules (optional, GE or 10GE port) and PoE+ technology that is first in the industry with 30W power in 1 RU factor (all ports) only in Cisco WS-C3560X-48T-E standalone switch. WS-C3560X-48T-E installation guide in terms of power supply, runs on Dual redundant and modular structure along with fan. Talking of security, Media Access Control Security is a new technology added with Cisco 3560-X Series Switches for hardware-based encryption.
Configuration:
The Cisco WS-C3560X-48T-E specification shows it as an IP service based model with 350W Default Power Supply (AC). USB Type-A are added to this WS-C3560X-48T-E smartnet for storage and Type-B ports for console; and also an added Ethernet management port is added along with all the pre-existing features.
Software:
The best thing of Cisco WS-C3560X-48T-E security is its advanced compatibility with all the management features and QoS. The most predominant and unique feature in the Cisco WS-C3560X-48T-E installation guide you will find is: Advanced Layer 3 feature: IPv4 and IPv6. With the complete IP services features including BGP, EIGRP and OSPF. The 3 layer advanced features of Cisco WS-C3560X-48T-E specification mainly includes “Enhanced Interior Gateway Routing Protocol” and IPv6 routing (OSPFv3 and EIGRPv6).
Service Module:
Flexible Netflow (FNF) (uplink ports) with custom dedicated hardware is one of the best additions to the Cisco® Catalyst® 3560-X Series switches. Both with SFP or SFP+, the service module is used at 1G/10G speed. The Cisco WS-C3560X-48T-E standalone switch therefore comes with no-latency and uninterrupted packet forwarding performance.
Location awareness, IP routing (high-performance), Superior QoS, featured mobility and easy availability are accountable for the borderless experience with the Cisco WS-C3560X-48T-E standalone switch.
Specifications:
The switching fabric, DRAM, Flash and Jumbo Frame are of 160 Gbps, 256 MB, 64 MB and 9216 Byte respectively that you will find in Cisco WS-C3560X-48T-E feature list. The number of Total VLANs is 1005 along with 4K VLAN IDs. There are 1K of total Switched Virtual Interfaces (SVIs), 101.2 mpps of forwarding rate and 9216 byte of Jumbo Frame.
Dimensions, Weight, Acoustic, MTBF, and Environmental Range:
The dimension of Cisco WS-C3560X-48T-E switch is 1.75 x 17.5 x 18.0 in inches or 4.45 x 44.5 x 46.0 in centimeters ((H x W x D) with 16.1 pounds or 7.3 kg in weight. 186,778 is the MTBF (Mean Time Between Failure hours) for all the Cisco 3560X-48T switches.
Power specification:
The storage temperature is -40 to 158°F (-40 to 70°C) and the operating temperature of Cisco WS-C3560X-48T-E smartnet is 23 to 113°F (-5 to 45°C); 5 to 90% (non condensing) being the percentage of Non Operating Non Condensing and Relative Humidity Operating and with the altitude up to 3000 meters (10,000 ft.) and up to 45°C.
Power Consumptions:
If we dissect the power consumption (W) into 4 yardstick: 0% traffic, 10% traffic, 100% traffic and weighted average, then The Cisco WS-C3560X-48T-E standalone switch runs on these numbers respectively: 121.3, 119.7, 120.4 and 120.0.
Ordering Information:
The Cisco WS-C3560X-48T-E ordering information includes Standalone Cisco switch, IP Services feature set and 350W AC power supply (1 RU).
