About
About WS-C3560X-48PF-S
Product Overview:
Cisco WS-C3560X-48PF-S is a non stackable standalone switch with PoE+ capability which provides IPv4 and IPv6 routing. It features Cisco EnergyWise to reduce energy consumption by optimizing it, Open Shortest Path First (OSPF) for routed access, limited lifetime warranty for hardware replacement, and access to Cisco Technical Assistance Center (TAC).
Configuration and network modules:
WS-C3560X-48PF-S supports IP Base feature set. It can be configured with four optional network modules namely Four GbE port network module, Two 10GbE SFP+ network module, Two 10GB-T ports network module, Service Module with two 10GbE SFP+ ports with product numbers C3KX-NM-1G, C3KX-NM-10G, C3KX-NM-10GT and C3KX-SM-10G respectively. The IP Base feature set can be upgraded to IP services through license which can provide users with layer 3 routing which is compatible with BGP, EIGRP, OSFP routing.
Power Supply and PoE power:
The Available PoE Power for this switch is 800W and 30W per port. Default AC Power Supply for this switch is 1100W and power supply model is C3KX-PWR-1100WAC. It provides Total Output BTU of 3793 BTU/hr, needs Input Current of 12-6A and has Power Cord Rating of 13 A. It supports dual redundant power supplies which can be purchased either at the time of ordering the switch, or at a later time.
Special Features:
This switch offers integrated hardware support for security feature MACsec, which enables MAC layer encryption using out-of-band methods. In addition to this, this switch provides ease of operations through cisco smart operations. This includes, but is not limited to Cisco Smart Install, Embedded Event Manager (EEM), Autonegotiation , Port Aggregation Protocol (PAgP) and Dynamic Trunking Protocol (DTP).
Technical Specifications:
WS-C3560X-48PF-S supports switching fabric of 160 Gbps and Jumbo frame of 9216 bytes. It has a total number of 1005 VLANs, 4K VLAN IDs,1K Total Switched Virtual Interfaces (SVIs). It has a forwarding rate of 101.2 mpps. Relative humidity levels needed for this switch are 5% to 95%, non condensing. Mean time between failures for this switch is 149,594 hours.
Additional Information:
The eol(end of life) date for this switch is 30-10-2016. We offer up to one year replacement/ repair warranty and 50% discount on most of our refurbished products. Further information is available on our website in the from of datasheet(PDF).
