About
About WS-C3560-24TS-E
Product overview
The Cisco catalyst WS-C3560-24TS-E is fixed, rack mountable, standalone / clustering Ethernet switch. It is a switch in the 3560-C platform of switches. It offers 24 10/100 PoE Ethernet ports with 2 SFP-based ports designated for uplinks.
Technical specifications
The Cisco catalyst WS-C3560-24TS-E is built with twenty four (24) Ethernet 10/100 ports and 2 Small Form-factor Pluggable (SFP) based Gigabit Ethernet ports with are for uplinks. These ports offer a transmission speed of up to 10/100 Mbps + 1000 Mbps. Its performance of 6.6 Mpps Throughput and a Backplane Capacity of 8.8 Gbps The buffer memory of the Cisco catalyst WS-C3560-24TS-E is configured to provide 128 MB DRAM and 32 MB of flash memory. It also supports jumbo frames of up to 1546 bytes and up to 12,000 MAC address table. The switch measures 1.73 in x 11.81 in x 17.5 in (4.40 cm x 30.0 cm x 44.45cm) and has a weight of 8.5 lbs. (3.9 kg). The WS-C3560-24TS-E offers Layer 2 switching (for basic connectivity and intelligent services) and Layer 3 (voice enabled) architecture. The software preinstalled into the catalyst is a Cisco IOS IP Base software (IPB)
Power information
The Cisco WS-C3560-24TS-E supports an external Redundant Power Supply has a Mean Time Between Failure (MTBF) of 326,100 hours. It has an overall power rating of 0.075 kVA. The RPS input (DC) required is set at +12 V at 5 A at an input frequency of between 50 -60 Hz. The total power dedicated as Power over Ethernet (PoE) is about 370 Watts with a maximum of about 15.4 W being supplied per port. The total output BTU is about 89 BTU/hours.
Management features
The Cisco WS-C3560-24TS-E is manageable via the following feature; Telnet Client, Clustering, RMON, RSPAN, Virtual Trunking Protocol (VTP), BOOTP, SPAN, Cisco Discover Protocol (CDP), CiscoView, CiscoWorks and others.
Standards
A few of the standards that the Cisco WS-C3560-24TS-E is compliant with includes the following; IEEE 802.3 10BASE-T specification, IEEE 802.3ad, IEEE 802.1D Spanning Tree Protocol, IEEE 802.3z 1000BASE-X specification, IEEE 802.1x, 1000BASE-SX, 1000BASE-CWDM SFP 1510 nm, 1000BASE-CWDM SFP 1590 nm, RMON I and II standards, SNMPv1, SNMPv2c, and SNMPv3 and others.
Additional information
The replacement for the Cisco WS-C3560-24TS-E is the WS-C3560V2-24TS-E which is also offers 24 10/100 and 2 SFP based GBE ports and runs on the IPS (enhanced) image IOS. This replacement came after the end of sale (eos) date on July 5, 2010. The end of life (eol) date is January 4, 2010. The end of support is set for July 31, 2015; the WS-C3560-24TS-E becomes obsolete after this date. Our price can be up to 35 % of the Cisco list price (i.e. 65 % discount) with a warranty of up to 12 months on this product and its parts. Download our Cisco datasheet for more Specifications (specs), firmware, and info on WS-C3560-24TS-E v02, v03, v04, v05, v06 and v07 and the comparison (WS-C3560-24TS-E vs WS-C3560-24TS-S)
