Products

WS-C2960XR-48FPD-I

Description:  The WS-C2960XR-48FPD-I is another switch from the Cisco 2960-XR series featuring IP Lite software together with stacking capabilities through FlexStack-Plus and FlexStack-Extended. The available PoE for this switch from a single PS source is 740W while it operates in a voltage range of 100 VAC to 264 VAC with a current rating of 10A to 5 A at 50-60Hz.

Available Now 
Warranty: 1 year Networking-Hardware Warranty Included
Shipping: Worldwide shipping via DHL, UPS, Fedex, and TNT
Repairs: We offer repair service for the WS-C2960XR-48FPD-I.
Exchange: Exchange credit for your defective unit available.

Request a Quote

Add more parts to quote
 Rated 5 with 1 reviews

Speak Now

To Speak to a sales representative for pricing & lead time:

Phone

1-919-443-0207

Email

sales@Networking-Hardware.com

About

About WS-C2960XR-48FPD-I

Product Overview

The WS-C2960XR-48LPD-I enables you to use optional dual field-replaceable power supplies along with the Cisco IP Lite IOS software, which is essential for Layer 3 and dynamic routing features. The switch is rack mountable and comes with a stacking module, cables and other accessories. The IP Lite image allows you to employ basic access layer 3 routing features including HSRP, VRRP and RIPV1 among others.

Switch Models and Configurations

The WS-C2960XR-48LPD-I has 2 SFP+ Uplink Interfaces and 48 Ethernet ports. It incorporates the IP Lite software image and includes the FlexStack-Plus and FlexStack-Etended capability. Together with a 370W PoE power, it has a 640WAC power supply.

Technical Specifications

The WS-C2960XR-48LPD-I has a forwarding bandwidth of 108Gbps and a switching bandwidth of 216 Gbps. There are a maximum of 1023 active VLANs and 4096 VLAN IDs available with this switch. Both the USB Type B and the Ethernet RJ-45 console ports are available with the WS-C2960XR-48LPD-I. It has a 10/100 Mbps Ethernet Network management interface.

Mechanical Specifications

The weight of the WS-C2960XR-48LPD-I is 6.4kg or 14.0 lbs while the dimensions are 1.75 x 16.0 x 17.5 inches or 4.45 x 40.8 x 44.5 cm.

Power

At 50 – 60 Hz, the switch operates between a range of 6A to 3A and 90 to 264 VAC. It has a power rating of 0.48 kVA. The WS-C2960XR-48LPD-I also has a weighted average power consumption of 54.8W which varies from 40.7W for no traffic to 55.9W for 100% traffic.

Power Management

Cisco has always been energy conscious and there is no surprise that in the 2960-XR switches, they have incorporated the greenest technology around. With the use of both Switch Hibernation Mode and Energy Efficient Ethernet system, the switch uses as less energy as possible during times of no operation. The EEE allows it to switch quickly between interfaces to quickly come at a low power idle mode when not in use.

Additional Information

All support from Cisco engineering for this product ends on May 1, 2018 whereas support for any potential security threats or vulnerabilities is carried on till May 1, 2019. The end of life (eol) announce for the WS-C2960XR-48LPD-I was made on 31st October 2016. We have up to 75% discount available on the price of these switches.

specifications

Technical specifications

WS-C2960XR-48FPD-I

Table 2. Security Features

Table 3. Redundancy and Resiliency for WS-C2960XR-48FPD-I

Table 4. Quality of Service for WS-C2960XR-48FPD-I

Cross-stack QoS

IPv4 security ACEs

Stack bandwidth

Stack bandwidth

Maximum number of PoE (IEEE 802.3af) ports

Cisco Auto SmartPorts

Trivial File Transfer Protocol (TFTP)

IEEE 802.3az EEE (Energy Efficient Ethernet)

Maximum transmission unit (MTU)-L3 packet

Centimeters (H x D x W)

Operating relative humidity

Stacking interfaces

Current

2960XR

validate on different VLANs

Cisco EtherChannel technology across diverse members of the stack

Up to eight per port

The Cisco committed information rate (CIR)

IPv6 Security ACEs

Stack limit

Stack limit

Available PoE power (single PS source)

Cisco Auto QoS

Network Timing Protocol (NTP)

Cisco EnergyWise

Jumbo frame - Ethernet frame

Pounds

Storage relative humidity

Console

Frequency

Cisco

security and policy enforcement

convergence time under 100 milliseconds

scheduling

Table 5. Scalability Numbers for WS-C2960XR-48FPD-I

Table 6. Cisco FlexStack-Plus for WS-C2960XR-48FPD-I

Table 7. Cisco FlexStack-Extended for

Table 8. PoE and PoE+ Power Capacity for 2960XR

Table 9. Application Visibility and Control for WS-C2960XR-48FPD-I

Table 10. Operational Simplicity Features for WS-C2960XR-48FPD-I

Table 11. Power Management for WS-C2960X-48FPD-L

Table 12. Technical Specifications for WS-C2960XR-48FPD-I

Forwarding rate: 64-Byte Layer 3 packets

Kilograms

MTBF in hours

Power

Power rating (switch maximum consumption values)

IP Lite

control admission to the network

allow rapid spanning-tree convergence

 congestion avoidance

16000

Yes

next gen. for flow visibility technology

enables single-line Command-Line Interface (CLI)

128 MB

Table 13. Mechanical Specifications for WS-C2960XR-48FPD-I

Table 14. Environmental Specifications

Table 15. Connectors and interfaces

Table 16. Voltage and Power Ratings

DC input voltages (RPS input) 12V

2 SFP+

enhances Layer-2 and Layer-3 network access

reconvergence for per-VLAN spanning-tree basis

up to 256 aggregate

4000

network metadata held in a DNS server

a boot server simplifies switch deployment

APM86392 600MHz dual core

-5ºC to 45ºC

10BASE-T ports: RJ-45 connectors, 2-pair Category 3, 4, or 5 Unshielded Twisted-Pair (UTP) cabling

740 Watts

 enable seamless multipurpose device profiles

automatically tries to reactivate a link

1250

hard-binding with the end device and the interface

all switches are automatically upgraded to new software version

USB (Type-B), Ethernet (RJ-45)

Up to 3000 m

48

allows the switch to undergo IOS integrity checks

4000

automatically chooses half- or full-duplex transmission mode

USB (Type-A) for external flash storage

80 Gbps

Port Security Dynamic ARP Inspection & IP Source Guard

1250

dynamic trunk configuration via all switch ports

10/100 Mbps Ethernet (RJ-45)

8

controls traffic between hosts in a common segment

1000

automates the installation of Cisco Fast EtherChannel

108 Gbps

130.9 Mpps

solves problems caused by malformed or forged (spoofed) IP

1000

Ethernet channeling

216 Gbps

216 Gbps

enables an IP phone / PC to authenticate on the same switch port

500

adjusts transmit & receive pairs if incorrect cable type 

1023

128 MB

security & QoS ACEs

 incorrect fiber-optic wiring detected and disabled

14.6

allows for network security by encrypting administrator traffic

 maximize memory allocation

1.75 x 16.0 x 17.5

simplifies centralized control of the switch

 minimize broadcasts and maximize bandwidth

administrators informed of users added to or removed

allows VLAN1 to be disabled

prevents unauthorized users from changing the switch configuration

fast client joins and departures of multicast streams

avoid mistaken topology loops

 isolate the streams from subscriber VLANs for bandwidth and security

prevents uncontrolled edge devices from developing Spanning Tree Protocol root nodes.

prevents faulty end stations

simplifies telephony installations

supports dynamic VLANs

 administrators remotely check ports via Layer 2 switch
DC input voltages (RPS input) 53V

MISSPELLINGS

Common misspellings:


Common misspellings:
WS-C296oXR-48FPD-I
WS-C2960XR-A8FPD-I
WS-C2960XR-4bFPD-I
WS-C2960XR-48FPD-IX