About
About WS-C2960S-24PD-L
Product overview:
The Catalyst WS-C2960S-24PD-L has Power over Ethernet (PoE) and also has dual-purpose uplinks in layer the 2 switch. 370W PoE provided by it while 30W for each 12 ports or 15.4 ports and also it has two 10 GE or 2 one GE SFP+ uplink ports for dual purpose with Cisco Flextack stacking and the Lan base software available.
Power Consumption and PoE:
The Input voltage is 100 to 240 VAC and Current is 5 to 2 A and frequency at 50 to 60Hz. The Power rating of this switch is 0.46 kVA. DC Input Voltages (RPS Input) are 12V at 4A and -52V at 15A. Power Consumption in 100 percent throughput is 55 and in 5 percent throughout is 54. It is 249 (195W PoE) and 451 (375W PoE) are power consumptions in half loads and full loads respectively. Internal power supply of this switch is auto ranging unit. AC power cord is used to connect AC power connector to AC power outlet. Cisco RPS offers extra Cisco RPS 2300 which uses AC input and gives DC output to the switches. It is attached to redundant power systems. 55 W is required for operation.
Technical Specifications:
The Cisco Catalyst switch C2960S-24PD-L has 24 ports rack mountable with switching capacity of 176 Gbps and forwarding performance of 65.5 Mbps with 64-byte packet size. The MAC address available for 8K entries. This switch is SSL encrypted with secure shell (SSH), RADIUS, TACACS+ are extra authentication methods are present. PoE is 370W capacity with DRAM 128MB and flash memory is 64 MB. MTBT is 237,016 hours. Forwarding bandwidth is 88 Gbps and switching bandwidth is 176 Gbps. Maximum VLAN is 255. Ethernet frame is 9216 bytes with MTU of 9198 bytes.
Network Security:
The Cisco Catalyst 2960-S series has a range of features to limit access to all networks and threats including controlling access to network by the use of 802.1x Monitor Mode, RADIUS and CISCO SXP to have a easy security and policy throughout the network. Threat defense measures including Port security, Dynamic ARP Inspection and IP source guard.
IPv6 security to protect against violent router ads, spoofing and other risks.
Hardware Features:
This switch offers Layer 2 switching, Power over Ethernet (PoE), BOOTP, dynamic IP, ARP,
Dynamic Trunking Protocol (DTP), Link Aggregation Control Protocol (LACP), MAC address, Port Security, auto-uplink, VLAN support, IPv6, auto negotiation, Broadcast storm control, and few more softwares. It has 1x4 PIN USB type A. 2 SFP+ and 1 mini USB type B and 1 RJ-45.
Additional Information:
The WS-C2960S-24PD-L has a release date of March 15, 2010. The factory reset is compatible via the mode key and has a default username, password and internet protocol (IP). This switch is cost effective wired connection with implementing QoS enforcing security policies .
